RTV around firewall
|
|
RTV around firewall |
|
|
 |
Navigation & Acknowledgements |
4 pictures on this page - scroll down to see the rest
RTV around SS firewall: 2020-01-04 Panasonic DMC-FT1
Sealing the edge of the stainless steel firewall to the composite firewall with high-temperature RTV compound. Here, working down the port side.
RTV around SS firewall: 2020-01-04 Panasonic DMC-FT1
Sealing the edge of the stainless steel firewall to the composite firewall with high-temperature RTV compound. Here, working down the port side, with mixing sticks inserted to keep the stainless steel parts clear of the rudder cross-shafts.
RTV around SS firewall: 2020-01-04 Panasonic DMC-FT1
Sealing the edge of the stainless steel firewall to the composite firewall with high-temperature RTV compound. Here, finishing down to the bottom of the port side, with mixing sticks inserted to keep the stainless steel parts clear of the rudder cross-shafts.
RTV around SS firewall: 2020-01-06 Panasonic DMC-FT1
Sealing the port edge of the stainless steel firewall to the composite firewall with high-temperature RTV compound. This shows that I managed (just) to keep the RTV clear of the rudder cross-shafts, and that the shafts are also clear of the stainless steel parts
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2020-02-10. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||