Cutting out fuselage rear bulkhead
|
|
Cutting out fuselage rear bulkhead |
|
|
 |
Navigation & Acknowledgements |
Cutting out rear fuselage bulkhead: 2010-08-27
Lumix DMC-FT1
The template for the rear fuselage bulkhead marked and cut out on polyethylene sheet, taped to the F04 brown foam sheet. I have already cut out the apertures in the foam with a scalpel; I thought it would be easier to do that before cutting the outside outline.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2017-05-12, 03:26. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||