failed funnel flattening
|
|
failed funnel flattening |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
attempt to make firewall pass-through: 2016-03-22 Panasonic DMC-FT1
A failed attempt to make a firewall pass-through from a stainless-steel funnel. I tried to do too much flattening at once with the arbour press and it just wrinkled.
attempt to make firewall pass-through: 2016-03-22 Panasonic DMC-FT1
A second failed attempt to make a firewall pass-through from a stainless-steel funnel. Here I left a smaller flange but still couldn't flatten it without destroying the rolled joint between the bowl and the outlet.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2016-04-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||