 |
fuel hose in tunnel
|
 |
fuel hose in tunnel
fuel hose in tunnel: 2019-06-05 Panasonic DMC-FT1
The braided steel fuel hose routed through the tunnel, looking up and to port. The supporting clamps, mounted on bonded-in studs, keep the hose near the port wall of the tunnel but clear of the retract mechanism. Stiffnuts now fitted to secure the clamps and inspectors lacquer applied. The stainless steel firewall is absent at this point, hence the daylight near top right of the picture.
|
This page last updated 2019-08-02.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages