bonding Tinnerman washer
|
|
bonding Tinnerman washer |
|
|
 |
Navigation & Acknowledgements |
bonding Tinnerman washer: 2022-08-08 Panasonic DMC-FT1
To make it less likely that the Tinnerman washers used under the cowl securing screws will get lost when removing screws, I decided to bond them to the cowl with Redux (Araldite 420). I hope this will also make the fixings slightly more robust against damage when removing or replacing the cowl.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-10-06. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||