 |
Port and starboard strobe cables to PSU
|
 |
Port and starboard strobe cables to PSU
port and starboard strobe cables at PSU: 2020-11-02 Panasonic DMC-FT1
The cables for both port and starboard wing connectors fitted to the strobe PSU under the baggage bay. I chose to use screened cable for these sections of wiring because they run parallel to other wiring, and I wanted to minimise interference from the high-energy strobe pulses. The cable screens are earthed to the strobe PSU case at this end and insulated at the wing root ends. In the wing conduits, I am using the unscreened cables supplied in the SkyFlash kit, since those run at right-angles to the majority of the other wiring and so will be less likely to induce interference signals.
|
This page last updated 2020-12-06.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages