ferrite on propeller wires
|
|
ferrite on propeller wires |
|
|
 |
Navigation & Acknowledgements |
ferrite on prop control wires: 2021-02-08 Panasonic DMC-FT1
The insulation on the wires supplied by Woodcomp from the propeller slip-ring brushes was too fat to allow 2 passes through the ferrite supplied with the CSC-1 controller. I used short lengths of 18AWG to warp around the ferrite and make the final connexion to the controller.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2021-03-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||