 |
prop drive dowels safety-wired
|
 |
prop drive dowels safety-wired
propeller drive dowels secured: 2016-07-18 Panasonic DMC-FT1
Some of the dowels were a really tight fit in the prop driver holes, but others could easily be pushed out. I didn't want to drive out the tight ones but didn't want the others to fall out, so after removing the propeller I safety-wired them all in place.
|
This page last updated 2016-08-13.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages