overhead panel layup
|
|
overhead panel layup |
|
|
 |
Navigation & Acknowledgements |
overhead panel layup: 2013-10-25
Lumix DMC-FT1
A piece of 2mm plywood cut to size for the overhead panel, with a layer of BID laid on it and covered with peel-ply. The lead weights (on pieces of polyethylene so they won't stick) keep the plywood conforming to the inside profile of the fuselage top.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-12-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||