trial of hose on overflow bottle
|
|
trial of hose on overflow bottle |
|
|
 |
Navigation & Acknowledgements |
hose to overflow bottle: 2020-02-11 Panasonic DMC-FT1
Trial fitting of hose to overflow bottle. This was a piece of the 6mm fuel hose supplied in the kit, but I decided later to use a different hose that was approved for the higher temperatures likely to be encountered in the water system.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2020-03-09. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||