firewall pass-through made from jam funnel
|
|
firewall pass-through made from jam funnel |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
making firewall pass-through: 2015-11-19 Panasonic DMC-FT1
Starting to make a firewall pass-through from a stainless steel jam funnel. Here a few cuts have been made around it with an angle-grinder, to separate the nozzle from the main part of the bowl.
making firewall pass-through: 2015-11-19 Panasonic DMC-FT1
Making a firewall pass-through from a stainless steel jam funnel. Here the nozzle has been separated from the main part of the bowl.
making firewall pass-through: 2015-11-25 Panasonic DMC-FT1
Here the remainder of the bowl has been flattened and trimmed roughly circular. After doing all this, I realised the nozzle was much too large for the wire bundle I need to pass through the firewall, but if I can find a smaller stainless steel funnel, I know now the idea will work.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2015-12-18. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||