 |
hose end damage
|
 |
hose end damage
unsuccessful hose-end fit: 2019-10-22 Panasonic DMC-FT1
This is a 101-04 hose-end that did not make up satisfactorily - the nipple was very tight to turn long before it was fully done up and then the thread stripped. Speedflow tech support reckoned it was probably cross-threaded, but the threads don't seem to show that sort of damage, especially at the lead-in. I suspect that some of the braiding must have got trapped in the thread.
|
This page last updated 2019-12-04.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages