Sling for fuselage top moulding
|
|
Sling for fuselage top moulding |
|
|
 |
Navigation & Acknowledgements |
Fuselage top moulding upside-down: 2013-07-22
Panasonic Lumix DMC-FT1
This is one of the sling supports I made for the wings, re-fitted with a new shorter piece of carpet to support the fuselage top moulding upside-down. I have started to mark out the positions of the access and viewing holes near the base of the fin.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-08-06. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||