 |
curing Flettner strip filler
|
 |
curing Flettner strip filler
curing Flettner strip filler: 2018-10-25 Panasonic DMC-FT1
To avoid heating the garage overnight for curing the coating of filler on the Flettner strips, I moved the whole thing into the boiler cupboard, where there was just enough room for it on the floor. It was a bit ticklish carrying this large assembly with sticky edges through several doors.
|
This page last updated 2018-12-03.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages