 |
Bracket layups held in place
|
 |
Bracket layups held in place
bracket layups clamped: 2013-08-23
Panasonic Lumix DMC-FT1
Because the sides of the containment bulkhead were covered with polyethylene sheet, the L-shaped bracket layups were not inclined to stay in place against them. To keep the layups flat and in the right place, I used small blocks of wood held gently in position with a clamp.
|
This page last updated 2013-09-08.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages