 |
bent screw
|
 |
bent screw
bent screw: 2021-06-22 Panasonic DMC-FT1
This AN525 screw was removed from one of the door hinges. I did not notice it at the time of removal, but when I came to re-fit the doors I realised it had got bent. The undersurface of the hinge recesses in the fuselage moulding is somewhat uneven, and I had to bend some of the AN970 washers to conform to that. But I had no idea that I'd had to use so much force on tightening the nut that this screw has bent. I did not re-fit it!
|
This page last updated 2021-07-02.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages